-
Cleanroom HVAC System Design Guide: Air Changes, Filtration and Pressure Picture a pharmaceutical fit-out: the ISO 7 filling room is drawn, the panels are ordered, and then someone asks the HVAC contractor how much air the room needs. By then the ceiling grid, the return ...
Industry News
2026-10-26
-
Cleanroom Door Types: Sliding Doors vs Swing Doors — How to Choose the Right One A 4 m² airlock between an ISO 8 corridor and an ISO 7 filling room leaves roughly 900 mm of clear width once the wall panels are up. Fit a 1000 mm swing leaf into that gap and it sweeps a full metre ...
Industry News
2026-10-12
-
China Cleanroom Manufacturer Export to Middle East: A Practical Buyer's Guide A Dubai contractor took delivery of 1,600 square metres of 50 mm cleanroom panels for an ISO 7 filling suite. Everything arrived on time and matched the drawings. The problem appeared at commissionin...
Industry News
2026-09-28
-
C-Shaped Steel Purlin vs Z-Shaped Purlin: Span, Lapping and Selection Guide A 30-metre clear-span roof over an electronics assembly hall is on the pricing table, and the same question arrives from the project engineer: C-shaped steel purlin or Z-shaped purlin? For most long-...
Industry News
2026-09-21
-
FFU Unit Guide: How Fan Filter Units Work, Specs, Sizing and Maintenance A 300 m² electronics assembly room held at ISO Class 7 typically runs 15 to 20 FFU units around the clock, and over ten years the electricity those motors consume can cost more than the units themsel...
Industry News
2026-09-07
-
Air Shower Room: How It Works, Key Specs, and How to Choose the Right One | Kaisier Ordinary work clothing can shed hundreds of thousands of particles per minute as a person moves, and a garment worn through a warehouse corridor carries considerably more than that. An air shower roo...
Industry News
2026-08-31
-
Pharmaceutical Cleanroom Systems: A Guide to Classes, Components and Compliance When a pharmaceutical batch fails microbial limits, the investigation often points back to the cleanroom. A hairline opening in a wall joint, a pressure cascade that collapses when a door opens, or a...
Industry News
2026-08-24
-
Modular Cleanroom Construction: A Practical Guide to Design, Cost & Speed If your production line needs a cleanroom in months rather than years, modular cleanroom construction is usually the fastest route. Instead of building walls from blockwork and plaster, you assemble ...
Industry News
2026-08-17
en
English
русский
Español
عربى
ไทย
